Contact Go2Filter / FiltEdge
Email: info@filtedge.com
Phone: +1 949-682-0025
Address: 15375 Barranca Parkway, Suite B-204, Irvine, CA 92618
RFQ Support
Please share product type, size, material, micron rating, quantity, application, and operating conditions.
Use this hub to find the right liquid filtration guide and prepare the information needed for product selection or an RFQ. Start with filter bag fundamentals, move to material and micron selection, confirm bag size and housing fit, then provide the actual liquid, operating conditions, quantity, and performance target for technical review.
Learn how bag filtration works, what the main components are, and which application details affect product selection.
Review liquid chemistry, temperature, solids, retention target, bag size, ring style, housing fit, and quantity before requesting a quotation.
Compare the two common bag formats and confirm that the selected bag matches the basket, sealing interface, and housing configuration.
| Your question | What to confirm | Best next step |
|---|---|---|
| Is bag filtration suitable? | Liquid, solids type and loading, target retention, flow, temperature, pressure, viscosity, and process objective | Begin with the fundamentals guide. |
| Which bag material and micron rating? | Chemical compatibility, continuous and peak temperature, particle distribution, nominal or application-defined retention target, and required finish | Use the selection guide and request technical review. |
| Which standard bag size? | Existing bag dimensions, housing model, basket size, sealing interface, ring style, and connection arrangement | Use the Size #1 vs #2 guide; confirm the actual housing. |
| What flow or pressure drop should be expected? | Liquid viscosity, clean and loaded differential pressure, housing size, bag area, solids loading, pump data, and allowable process loss | Do not select from a generic flow value alone. |
| When should the bag be changed? | Differential-pressure trend, process quality, solids loading, run time, cleaning practice, and site operating limit | Set a site-specific changeout criterion; avoid a universal service-life claim. |
| What belongs in an RFQ? | Product type, bag or housing size, material, micron rating, ring or seal, quantity, liquid, temperature, pressure, flow, and application | Send available drawings, photos, labels, samples, or equipment data. |
When the application inputs are ready, review available liquid filter bag options or industrial filter housings. Product availability and suitability are confirmed against the actual process and equipment rather than inferred from a generic product name.
Start with the liquid chemistry, concentration, continuous and peak temperature, solids, required retention, and process conditions. Material suitability should be reviewed for the actual application; one material is not universally compatible with every liquid.
No. A finer rating may increase resistance or shorten the interval before changeout when solids loading is high. Confirm the particle or quality target and whether the stated rating is nominal, absolute, or application-defined before comparing products.
Not automatically. They are different common formats and must match the housing basket, sealing interface, ring style, and installed dimensions. Verify the housing model or measurements before ordering.
No. Flow, pressure drop and changeout interval also depend on viscosity, solids loading, particle distribution, bag media, housing area, pump conditions, temperature, and the site’s operating limit.
Provide the product type, size or drawing, material, micron rating, ring or seal, quantity, liquid, temperature, pressure, flow if known, and application. Photos, labels, an existing sample, and housing details can reduce specification errors.
If the specification is incomplete, use the DoctopFilter contact page for technical questions. When the product and operating inputs are ready, request a filtration product quote for review.